Send document comments to nexus7k-docfeedback@cisco.com
Contents
viii
Cisco Nexus 7000 Series NX-OS Interfaces Configuration Guide, Release 5.x
OL-23435-03
Adding a Layer 2 Port to a Port Channel 6-17
Adding a Layer 3 Port to a Port Channel 6-19
Configuring the Bandwidth and Delay for Informational Purposes 6-21
Shutting Down and Restarting the Port-Channel Interface 6-22
Configuring a Port-Channel Description 6-24
Configuring the Speed and Duplex Settings for a Port-Channel Interface 6-25
Configuring Flow Control 6-26
Configuring Load Balancing Using Port Channels 6-27
Enabling LACP 6-29
Configuring LACP Port-Channel Port Modes 6-30
Configuring LACP Port-Channel MinLinks 6-31
Configuring the LACP Port-Channel MaxBundle 6-32
Configuring the LACP Fast Timer Rate 6-34
Configuring the LACP System Priority 6-34
Configuring the LACP Port Priority 6-35
Disabling LACP Graceful Convergence 6-36
Disabling LACP Suspend Individual 6-39
Reenabling LACP Suspend Individual 6-40
Verifying the Port-Channel Configuration 6-42
Monitoring the Port-Channel Interface Configuration 6-43
Example Configurations for Port Channels 6-43
Additional References 6-44
Related Documents 6-45
Standards 6-45
MIBs 6-45
Feature History for Configuring Port Channels 6-45
CHAPTER
7 Configuring vPCs 7-1
Information About vPCs 7-2
vPC Overview 7-2
vPC Terminology 7-5
vPC Peer Links 7-6
Peer-Keepalive Link and Messages 7-11
vPC Peer-Gateway 7-12
vPC Domain 7-13
vPC Topology 7-14
Compatibility Parameters for vPC Interfaces 7-15
vPC Number 7-18
Moving Other Port Channels into a vPC 7-18
To Next Page
Loading...
Need help?
General
