32-77
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
78-14064-04
Chapter 32 Configuring PFC QoS
Configuring PFC QoS
Setting the PFC QoS Statistics Data Export Field Delimiter
To set the PFC QoS statistics data export field delimiter, perform this task:
This example shows how to set the PFC QoS statistics data export field delimiter and verify the
configuration:
Router# configure terminal
Router(config)# mls qos statistics-export delimiter ,
Router(config)# end
Router# show mls qos statistics-export info
QoS Statistics Data Export Status and Configuration information
---------------------------------------------------------------
Export Status : enabled
Export Interval : 250 seconds
Export Delimiter : ,
Export Destination : 172.20.52.3, UDP port 514 Facility local6, Severity debug
QoS Statistics Data Export is enabled on following ports:
---------------------------------------------------------
FastEthernet5/24
QoS Statistics Data export is enabled on following shared aggregate policers:
-----------------------------------------------------------------------------
aggr1M
QoS Statistics Data Export is enabled on following class-maps:
---------------------------------------------------------------
class3
Command Purpose
Step 1
Router(config)# mls qos statistics-export
delimiter delimiter_character
Sets the PFC QoS statistics data export field delimiter.
Router(config)# no mls qos statistics-export
delimiter
Reverts to the default PFC QoS statistics data export field
delimiter
Step 2
Router(config)# end
Exits configuration mode.
Step 3
Router# show mls qos statistics-export info
Verifies the configuration.
To Next Page
Loading...
