Cisco 7609 User Manual

36-4
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
78-14064-04
Chapter 36 Configuring SNMP IfIndex Persistence
Configuration Examples
Clearing SNMP IfIndex Persistence Configuration from a Specific Interface Example
In the following example, any previous setting for SNMP ifIndex persistence on Ethernet interface 3/1
is removed from the configuration. If SNMP ifIndex persistence is globally enabled, SNMP ifIndex
persistence will be enabled for Ethernet interface 3/1. If SNMP ifIndex persistence is globally disabled,
SNMP ifIndex persistence will be disabled for Ethernet interface 3/1.
router(config)# interface ethernet 3/1
router(config-if)# snmp ifindex clear
router(config-if)# exit

Cisco 7609 Specifications

General

Chassis Slots	9
Switch Fabric Capacity	720 Gbps
Power Supply Options	AC or DC
Product Type	Router
Form Factor	Rack-mountable
Supported Line Cards	Various Cisco 7600 Series line cards
Operating System	Cisco IOS
Management	CLI, SNMP
Forwarding Performance	400 Mpps
Maximum Power Consumption	4000 Watts
Redundancy	Yes
Interfaces/Ports	Various, depending on line cards installed