Cisco 7609 - Page 562

Index
IN-12
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
78-14064-04
configuration guidelines 25-6
configuring
initializing authentication of a client
25-11
manual reauthentication of a client 25-11
quiet period 25-11
RADIUS server 25-10
RADIUS server parameters on the switch 25-8
switch-to-authentication-server retransmission
time
25-13
switch-to-client EAP-request frame retransmission
time
25-13
switch-to-client frame-retransmission number 25-14
switch-to-client retransmission time 25-12
default configuration 25-5
described 25-1
device roles 25-2
displaying statistics 25-15
EAPOL-start frame 25-3
EAP-request/identity frame 25-3
EAP-response/identity frame 25-3
enabling
802.1X authentication
25-7, 25-8
periodic reauthentication 25-10
encapsulation 25-2
initiation and message exchange 25-3
method lists 25-7
ports
authorization state and dot1x port-control
command
25-4
authorized and unauthorized 25-4
resetting to default values 25-15
switch
as proxy
25-2
RADIUS client 25-2
topologies, supported 25-4
port-based QoS features
see QoS
port-channel
see EtherChannel
port-channel load-balance
command
13-10, 13-11
command example 13-10, 13-11
port cost, STP 15-29
port debounce timer
disabling
6-15
displaying 6-15
enabling 6-15
PortFast
See STP PortFast
PortFast BPDU filtering
See STP PortFast BPDU filtering
port negotiation
6-8
port priority, STP 15-27
ports
secure
26-1
setting the debounce timer 6-15
port security
aging
26-4
configuring 26-3
default configuration 26-2
described 26-1
displaying 26-6
violations 26-2
with other features 26-2
power management
enabling/disabling redundancy
38-2
overview 38-1
powering modules up or down 38-3
system power requirements, nine-slot chassis 38-4
primary VLANs 10-2
priority
overriding CoS
11-7, 11-8
private VLANs 10-1
community VLANs 10-2
configuration guidelines 10-2
configuring 10-4
host ports 10-8
pomiscuous ports 10-9
routing secondary VLAN ingress traffic 10-7