REFERENCE
i
SNET: CISCO 7940/7960 REFERENCE GUIDE 15
Back to Table of Contents
CUSTOMIZING RINGS AND MESSAGE INDICATORS
You can customize the way that your phone indicates an incoming call or a new voice mail message for each of your lines. Custom-
ized ring sounds and other indicators can help you quickly differentiate between multiple lines. For example, you can choose a chirp-
ing sound to indicate an incoming call on Line 1 and a drumbeat to indicate an incoming call on Line 2.
IF YOU WANT TO... THEN...
Change the ring sound Choose > Ring Type.
Select a phone line or the default ring setting. Use the Navigation button to scroll through the ring types. Press Play to hear the selected ring
type. When you nd a ring sound that you want, press Select, then press OK.
You can apply the default ring setting to a selected phone line by pressing Default.
Change the ring pattern (ash-only, ring
once, beep-only, etc.)
Log in to your User Options web pages, select your device, then choose Change the Ring Settings for your phone from the main menu.
Change the way that the voice message
light on your handset works
Log in to your User Options web pages, select your device, then choose Change the Message Waiting Lamp Policy... from the main menu.
Typically, the default system policy tells your phone to “always light” when you receive a new voice message.
CUSTOMIZING THE PHONE SCREEN
You can adjust the contrast and the language for your phone screen.
IF YOU WANT TO... THEN...
Change the phone screen contrast Choose > Contrast. Press Up, Down or , then press OK. Or press Cancel to revert to the previously saved setting.
Change the language on your phone screen Log in to your User Options web pages, select your device, then choose Change the Locale... from the main menu.
To Next Page
Loading...
Need help?
General
