The following table defines the function and usage of Shared Line parameters in the General and Share Line
Appearance sections under the Ext(n) tab in the phone web interface. It also defines the syntax of the string
that is added in the phone configuration file with XML(cfg.xml) code to configure a parameter.
Table 22: Parameters for Shrared Lines
DescriptionParameter
Enables a line for the service.
Perform one of the following:
• In the phone web interface, select yes to enable. Otherwise, select No.
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Line_Enable_1_ ua="na">Yes</Line_Enable_1_>
Valid values: Yes|No
Default: Yes
Line Enable
Indicates whether other Cisco IP phones share this extension is, or the extension is
private.
Perform one of the following:
• In the phone web interface, select yes to enable. Otherwise, select No.
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Share_Ext_1_ ua="na">No</Share_Ext_1_>
If you set Share Ext to No, this extension is private and doesn't share calls, regardless
of the Share Line Appearance setting. If you set this extension to Yes, calls follow
the Share Line Appearance setting.
Valid values: Yes|No
Default: Yes
Share Ext
The user identified assigned to the shared line appearance.
Perform one of the following:
• In the phone web interface, enter the user ID.
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Shared_User_ID_1_ ua="na">Shared UserID</Shared_User_ID_1>
Shared User ID
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
172
Cisco IP Phone Configuration
Parameters for Configuring a Shared Line
To Next Page
Loading...
Need help?
General
