DescriptionParameter
Duration in seconds of the interval between CPE attempts to connect to
the ACS when Periodic Inform Enable is set to yes.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Periodic_Inform_Interval
ua="na">20</Periodic_Inform_Interval>
• In the phone web page, enter a valid duration in seconds.
Default: 20
Periodic Inform Interval
Settings that enables or disables the CPE connection requests.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Periodic_Inform_Enable
ua="na">Yes</Periodic_Inform_Enable>
• In the phone web page, select Yes to enable this feature and select
No to disable it.
Valid values: Yes|No
Default: Yes
Periodic Inform Enable
Settings that enables or disables TR-069 transaction logs.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<TR-069_Traceability ua="na">Yes</TR-069_Traceability>
• In the phone web page, select Yes to enable this feature and select
No to disable it.
Valid values: Yes|No
Default: No
TR-069 Traceability
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
189
Cisco IP Phone Configuration
Parameters for TR-069 Configuration
To Next Page
Loading...
Need help?
General
