DescriptionParameter
Enables the H264 Base Profile 1 codec when you select Yes and disables it when you
select No.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<H264_BP1_Enable_1_ ua="na">Yes</H264_BP1_Enable_1_>
• In the phone web interface, set this field to Yes or No to enable or disable the
H264 BP1 codec.
Allowed values: Yes|No
Default: Yes
H264 BP1 Enable
Enables the H264 High Profile codec when you select Yes and disables it when you
select No.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<H264_HP_Enable_1_ ua="na">Yes</H264_HP_Enable_1_>
• In the phone web interface, set this field to Yes or No to enable or disable the
H264 HP codec.
Allowed values: Yes|No
Default: Yes
H264 HP Enable
Encryption method to be used during secured call.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<Viedo_Encryption_Method_1_ ua="na">AES
128</Viedo_Encryption_Method_1_>
• In the phone web interface, select your preferred encryption method from the list.
Allowed values: AES 128|AES 256 GCM
Default: AES 128
Encryption Method
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
289
Cisco IP Phone Configuration
Video Codec Parameters
To Next Page
Loading...
Need help?
General
