DescriptionParameter
Used in outbound REGISTER requests.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<SIP_User_Agent_Name
ua="na">$VERSION</SIP_User_Agent_Name>
• In the phone web page, enter an appropriate name.
Default: $VERSION
If empty, the header is not included. Macro expansion of $A to $D
corresponding to GPP_A to GPP_D allowed
SIP User Agent Name
Server header used in responses to inbound responses.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<SIP_Server_Name ua="na">$VERSION</SIP_Server_Name>
• In the phone web page, enter an appropriate name.
Default: $VERSION
SIP Server Name
User-Agent name to be used in a REGISTER request. If this is not
specified, the SIP User Agent Name is also used for the REGISTER
request.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<SIP_Reg_User_Agent_Name ua="na">agent
name</SIP_Reg_User_Agent_Name>
• In the phone web page, enter an appropriate name.
Default: Blank
SIP Reg User Agent Name
Accept-Language header used.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<SIP_Accept_Language ua="na">en</SIP_Accept_Language>
• In the phone web page, enter an appropriate language.
There is no default. If empty, the header is not included.
SIP Accept Language
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
341
Cisco IP Phone Installation
SIP Parameters
To Next Page
Loading...
Need help?
General
