DescriptionParameter
If set to yes, it configures the phone to immediately handle NOTIFY
sipfrag messages.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Keep_Referee_When_Refer_Failed
ua="na">No</Keep_Referee_When_Refer_Failed>
• In the phone web page, select Yes or No.
Allowed values: Yes or No
Default: No
Keep Referee When Refer Failed
Display the Diversion info included in SIP message on LCD or not.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Display_Diversion_Info
ua="na">No</Display_Diversion_Info>
• In the phone web page, select Yes or No.
Allowed values: Yes or No
Display Diversion Info
Show the caller ID from the SIP INVITE message “From” header when
set to Yes, even if the call is an anonymous call. When the parameter is
set to no, the phone displays "Anonymous Caller" as the caller ID.
Perform one of the following.
• In the phone configuration file with XML(cfg.xml), enter a string
in this format:
<Display_Anonymous_From_Header
ua="na">No</Display_Anonymous_From_Header>
• In the phone web page, select Yes or No.
Allowed values: Yes or No
Default: No
Display Anonymous From Header
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
347
Cisco IP Phone Installation
SIP Parameters
To Next Page
Loading...
Need help?
General
