Cisco 8832 User Manual

Step 5 Select Edit settings.
Step 6 Select the Type field.
You can select Enterprise, Group, Personal, Enterprise Common, or Group Common as your BroadSoft
Directory contact type.
Step 7 Press Save to apply the change.
Manage Your Contacts in the BroadSoft Personal Directory
You can add, edit, or delete contacts in the BroadSoft Personal directory.
Before you begin
• Your phone connects to the BroadSoft XSI service.
• Your administrator enables the BroadSoft Personal directory.
• Your administrator sets the BroadSoft Personal directory as the target directory to store new contacts.
• Your administrator enables the directory browse mode.
When this mode is enabled, a preload operation will start automatically to retrieve all the contacts from
the directory.
Procedure
Step 1 Press Contacts.
Step 2 Press Category, if it displays on the phone. Otherwise, skip the step.
Step 3 To add a contact in the BroadSoft Personal directory, do the following:
a) Select the BroadSoft Personal directory. The default name is Personal.
If your administrator disables the directory individual mode, the phone displays the menu item
BroadSoft directory instead, select it.
Note
b) Wait for the preload operation to be completed or press Cancel to stop the preload operation.
If your administrator disables the directory browse mode, the menu Search personal directory displays
instead. Enter your search criteria, and press Search.
c) Press Option, and then select Add.
d) Enter details of the contact.
e) Press Save.
Step 4 To add a contact from other directories (if enabled) to the BroadSoft Personal directory:
a) Select the All directories, the BroadSoft directory, the LDAP directory, or the personal address book.
b) Search for a contact that you want to add.
c) Highlight the contact.
d) Press Option, and then select Add contact.
e) Enter details of the contact.
f) Press Save .
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
57
Contacts
Manage Your Contacts in the BroadSoft Personal Directory

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g