Cisco 8832 User Manual

Edit Your BroadSoft Directory Password
Procedure
Step 1 Press Contacts.
Step 2 Select the Broadsoft directory.
Step 3 Press Option.
Step 4 Select Edit Settings.
Step 5 Select Password.
Step 6 Press Edit and modify the entry.
Step 7 Press Apply to save the change.
Step 8 Edit the Password field.
Step 9 Press Save to apply the change.
LDAP Directory
The Cisco IP Phone supports Lightweight Directory Access Protocol (LDAP) v3. You can search for a specified
LDAP directory for a name, phone number, or both. LDAP-based directories, such as Microsoft Active
Directory 2003 and OpenLDAP-based databases, are supported.
To access the LDAP directory on the phone, enter your user credentials at least once. Your administrator can
set up your user credentials on the phone administration web page. Once you successfully access the LDAP
directory, the phone saves the user credentials. Next time, you can skip the user login procedure. The phone
can save the user credentials for the host users or guest users. These users normally sign in to the phone
through the Flexible Seating or the Extension Mobility feature.
Edit Credentials of Your LDAP Directory
When you access the LDAP directory on the phone, you might be prompted to enter your user credentials.
You can edit the credentials in advance to bypass the sign-in procedure. You can also change the LDAP
account by editing the user credentials.
The phone saves the credentials for different types of users. For example, the users who sign into the phone
with the Flexible Seating or Extension Mobility feature. After you switch a user on the phone, the phone
retains the user's credentials. Therefore, you can still access the LDAP directory without the need to sign in.
Before you begin
Your administrator enables the LDAP directory.
Procedure
Step 1 Press Contacts.
Step 2 (Optional) Press Category.
If your administrator disables the directory browse mode, the softkey doesn't display on the phone.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
61
Contacts
Edit Your BroadSoft Directory Password

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g