Cisco 8832 User Manual

Related Topics
Call a Contact in Your LDAP Directory, on page 63
Edit a Contact Number in Your LDAP Directory, on page 63
Call a Contact in Your LDAP Directory
Before you begin
Your administrator enables the LDAP directory.
Procedure
Step 1 Search for a contact in the LDAP directory, see Search for a Contact in Your LDAP Directory, on page 62.
After the search is completed, the matched contacts display in the form of entries in the search result list.
Step 2 In the Company directory (LDAP) result list screen, use the outer ring of the navigation cluster to highlight
an entry.
Typically, the phone displays an entry together with a contact number. However, if an entry doesn't have any
contact number, the contact number field is empty.
Step 3 Press Call.
Your phone selects the first available contact number of the entry to dial out. If an entry contains
multiple contact numbers and you want to call the other contact numbers, proceed with the next
steps. Otherwise, skip the remaining steps.
Note
Step 4 Press Details to view more information of the highlighted entry.
Step 5 In the Company directory (LDAP)address entry screen, use the outer ring of the navigation cluster to scroll
through the details.
You can find that certain attributes display multiple times in the entry details, and each attribute contains a
contact number.
Step 6 Highlight a contact number that is available to dial out, and press Call.
The Call softkey displays only for the contact numbers that are available to dial out.
Edit a Contact Number in Your LDAP Directory
Before you make a call, you can edit the contact number based on an existing number that you select.
Before you begin
Your administrator enables the LDAP directory.
Cisco IP Conference Phone 8832 Multiplatform Phone User Guide
63
Contacts
Call a Contact in Your LDAP Directory

Cisco 8832 Specifications

General

Control type	Buttons
Display type	LCD
Product type	IP conference phone
Voice codecs	G.711a, G.711u, G.722, G.729A, G.729ab, OPUS, iLBC
Certification	CE Markings per directives 2014/30/EU and 2014/53/EU and 2014/35/EU \u2028 \u2028 UL 60950 Second Edition \u2028 CAN/CSA-C22.2 No. 60950 Second Edition \u2028 EN 60950 Second Edition (including A11 and A12) IEC 60950 Second Edition (including A11 and A12) EN 60950-1 IEC 60950-1 AS/NZS 60950.1 47CFR Part 15 (CFR 47) Class B AS/NZS CISPR32 Class B \u2028 CISPR32 \u2028Class B EN55032 \u2028 Class B EN 300 386 ICES003 Class B \u2028 VCCI Class B \u2028 EN61000-3-2 \u2028 EN61000-3-3 \u2028 EN61000-4-2 IEC61000-4-2 EN61000-4-3 IEC61000-4-3 EN61000-4-6 IEC61000-4-6 KN22 Class B \u2028 EN55024 \u2028 CISPR24 \u2028 KN24 Armadillo Light AS/ACIF S004 NZPTC220
Product color	Charcoal
Frequency range	100 - 20000 Hz
Built-in display	Yes
Display diagonal	3.9 \
Languages support	ARA, BUL, CAT, CHI (SIMPL), CHI (TR), CZE, DAN, DEU, DUT, ENG, ESP, EST, FIN, FRE, GRE, HEB, HUN, ITA, JPN, KOR, LAT, LIT, NOR, POL, POR, RUM, RUS, SER, SLK, SLV, SWE, TUR, UKR
Display resolution	480 x 128 pixels
Security algorithms	EAP-FAST, EAP-TLS, SHA-256, SSH
Ethernet LAN data rates	10, 100 Mbit/s
Ethernet interface type	Fast Ethernet
Supported network protocols	IPv4, IPv6, SIP, SDP, UDP, DHCP, GARP, TFTP, HTTPS, RTP, RTCP, Cisco Discovery Protocol, LLDP
Cables included	USB
Storage temperature (T-T)	-10 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %
USB connector type	USB Type-C
RJ-45 ports quantity	1

Weight and Dimensions

Width	278 mm
Height	61 mm
Weight	1850 g