EasyManua.ls Logo

Cisco AIR-AP1252AG-A-K9 - Page 18

Cisco AIR-AP1252AG-A-K9
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-4
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-03
Chapter 1 Overview
Hardware Features
Figure 1-2 illustrates a radio module. The access point supports three types of modules:
2.4-GHz radio module—contains a 2.4-GHz (draft IEEE 802.11n version 2.0) radio and three
antenna connectors.
5-GHz radio module—contains a 5-GHz (draft IEEE 802.11n version 2.0) radio and three antenna
connectors (identified with blue labels).
Blank module—does not contain a radio or antenna connectors.
Figure 1-2 Radio Module - new pic
Note The 5-GHz antennas have a blue dot or blue label to correspond to the blue labels around the antenna
connectors on the 5-GHz radio module.
1 Radio antenna connector (A-Tx/Rx) 3 Radio antenna connector (B-Tx/Rx)
2 Radio antenna connector (C-Rx)

Table of Contents

Related product manuals