2-11
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-03
Chapter 2 Installing the Access Point
Mounting Above a Suspended Ceiling
Mounting Above a Suspended Ceiling
The access point mounting plate is designed to be integrated into the T-bar grid above the tiles of a
suspended ceiling. Using adjustable-height box hanger mount systems (not supplied) such as the B-Line
BA50A or Caddy 512A, you orient the access point antenna just above the top surface of a standard
ceiling tile. You may need to modify a thicker tile to allow room for the antenna.
Three options are available for mounting your access point above a suspended ceiling. The first, and
preferred option is the B-line system. This mounting system replaces the original Caddy system and
provides a more secure above ceiling installation (see Figure 2-4).
Figure 2-4 Above Ceiling Mounting System – Option One
275813
To Next Page
Loading...
