2-25
Cisco Aironet 1250 Series Access Point Hardware Installation Guide
OL-8247-03
Chapter 2 Installing the Access Point
Installing the Access Point to the Mounting Plate
Figure 2-17 Mounting Plate Slots and the Access Point Foot Pins (shown in latched position)
Step 4
Slide the access point until the mounting plate latch clicks.
Step 5 To secure your radio modules, see the “Securing the Access Point to the Mounting Plate” section on
page 2-27.
Step 6 To secure your access point with a PC type security cable, see the “Using a Security Cable to Secure the
Access Point” section on page 2-29.
1 Access point foot pins and mounting plate slot 2 Mounting plate latch and latch
opening
To Next Page
Loading...
