Cisco ASR 900 Series User Manual

Configuring a BFD Template
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
bfd-template single-hop template-name
4.
interval microseconds {both microseconds | min-tx microseconds min-rx microseconds} [multiplier
multiplier-value]
5.
interval {both milliseconds | min-tx milliseconds min-rx milliseconds} [multiplier multiplier-value]
6.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Router> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Creates a BFD template and enters BFD configuration mode.
bfd-template single-hop template-name
Step 3
Example:
Router(config)# bfd-template single-hop
bfdtemplate1
The bfd-template command allows you to create a BFD template
and enters BFD configuration mode. The template can be used to
specify a set of BFD interval values. You can then invoke the BFD
template when you set up the MPLS–TP tunnel.
Configures the transmit and receive intervals in microseconds
between BFD packets, and specifies the number of consecutive
interval microseconds {both microseconds | min-tx
microseconds min-rx microseconds} [multiplier
multiplier-value]
Step 4
BFD control packets that must be missed from a BFD peer before
BFD declares that a peer is unavailable.
Example:
Router(config-bfd)# interval microseconds
both 3300 multiplier 3
Configures the transmit and receive intervals in milliseconds
between BFD packets, and specifies the number of consecutive
interval {both milliseconds | min-tx milliseconds
min-rx milliseconds} [multiplier multiplier-value]
Step 5
BFD control packets that must be missed from a BFD peer before
BFD declares that a peer is unavailable.
Example:
Router(config-bfd)# interval both 120
multiplier 3
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
112
VPLS Configuration over MPLS-TP
Configuring a BFD Template

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English