Cisco ASR 900 Series User Manual

Router(config-pw-class)# exit
Router(config)# controller t1 0/0/3
Router(config-controller)# clock source internal
Router(config-controller)# cem-group 0 unframed
Router(config-controller)# exit
Router(config)# interface cem 0/0/3
Router(config-if)# cem 0
Router(config-if-cem)# xconnect 22.22.22.22 1000 pw-class UDP
Router(config-if-cem)# udp port local 49800 remote 49800
Router(config-if-cem)# exit
Example Verifying the Configuration of Structure-Agnostic TDM over Packet
Router# show xconnect all
Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State
UP=Up DN=Down AD=Admin Down IA=Inactive
SB=Standby HS=Hot Standby RV=Recovering NH=No Hardware
XC ST Segment 1 S1 Segment 2 S2
------+---------------------------------+--+---------------------------------+--
UP pri ac CE0/0/3:0(SATOP T1) UP udp 22.22.22.22:1000 UP
Router# show pw-udp vc
Local intf Local circuit VC ID Status
----------------- -------------------------- ---------- ---------------
CE0/0/3 SATOP T1 1000 established
LAddr: 11.11.11.11 LPort: 49800
RAddr: 22.22.22.22 RPort: 49800
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
137
Circuit Emulation Service over UDP
Structure-Agnostic TDM over Packet over UDP

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English