Cisco ASR 900 Series User Manual

PurposeCommand or Action
Specifies the control word.mpls control-word
Example:
Step 10
Example:
Device(config-vfi)# mpls control-word
Exits VFI configuration mode and returns to privileged
EXEC mode.
end
Example:
Device(config)# end
Step 11
Configuring Static-to-Dynamic Multisegment Pseudowires for MPLS-TP
When you configure static-to-dynamic pseudowires, you configure the static pseudowire class with the protocol
none command, create a dynamic pseudowire class, and then invoke those pseudowire classes with the neighbor
commands.
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
37
MPLS Transport Profile
Configuring Static-to-Dynamic Multisegment Pseudowires for MPLS-TP

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English