Cisco ASR 900 Series User Manual

PurposeCommand or Action
Creates a BFD template and enter BFD configuration
mode.
bfd-template single-hop template-name
Example:
Device(config)# bfd-template single-hop mpls-bfd-1
Step 3
Specifies a set of BFD interval values.
interval [microseconds] {both time | min-tx time min-rx
time} [multiplier multiplier-value]
Step 4
Example:
Device(config-bfd)# interval min-tx 99 min-rx 99
multiplier 3
Exits BFD configuration mode and returns to
privileged EXEC mode.
end
Example:
Device(config-bfd)# exit
Step 5
Configuring Pseudowire OAM Attributes
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
pseudowire-static-oam class class-name
4.
timeout refresh send seconds
5.
exit
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
22
MPLS Transport Profile
Configuring Pseudowire OAM Attributes

Cisco ASR 900 Series Specifications

General

Brand	Cisco
Model	ASR 900 Series
Category	Network Router
Language	English