Cisco ASR 9010 Overview And Reference Guide

2-66
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Chapter 2 Functional Description
Power System Functional Description
AC Power Trays
The AC power tray provides 20-A UL/CSA-rated, 16-IEC-rated AC receptacles. The version 1
receptacle has a bail lock retention bracket to retain the power cord. The version 2 receptacle has a clamp
mechanism with a screw that can be tightened to retain the power cord. DC output power from the AC
power tray is connected to the router by two power blades that mate to the power bus on the backplane.
System communication is through a I2C cable from the backplane.
Figure 2-57 shows the back of the version 1 AC power tray and Figure 2-58 shows the back of the version
2 power tray.
Figure 2-57 Version 1 AC Power Tray Rear Panel
Figure 2-58 Version 2 AC Power tray Rear Panel
1 DC output power blades 3 Power switch
2 IEC input receptacles with retention brackets 4 I2C cable from backplane
1 DC output power blades 3 I2C cable from backplane
2 IEC input receptacles with retention brackets
242977
1 2 43
284279
31 2

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor