Cisco ASR 9010 Overview And Reference Guide

2-26
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Chapter 2 Functional Description
Ethernet Line Cards
8-Port 10-Gigabit Ethernet (8x10GE) 2:1 Oversubscribed Line Card
The 8-port 10-Gigabit Ethernet (8x10GE) 2:1 oversubscribed line card has eight 10-Gigabit Ethernet,
oversubscribed, XFP module ports. Two 10 Gigabit Ethernet ports connect to XAUI interfaces on each
of the four NPUs.
The 8x10GE 2:1 oversubscribed line card is available in base, extended, and low-queue versions. All
versions are functionally equivalent, with the extended version of the line card providing typically twice
the service scale of the base line card.
Figure 2-19 shows the block diagram for the 8x10GE 2:1 oversubscribed line card, and Figure 2-20
shows the front panel connectors and indicators.
Figure 2-19 8-Port 10-Gigabit Ethernet (8x10GE) 2:1 Oversubscribed Line Card Block Diagram
8x10GE
Line Card
243065
B
a
c
k
p
l
a
n
e
Fabric
Interface
Chip
GE
PHY
FPGA
NPU
NPU
FPGA
10GE XFP
10GE XFP
NPU
NPU
10GE XFP
10GE XFP
10GE XFP
10GE XFP
10GE XFP
10GE XFP
CPU

Cisco ASR 9010 Specifications

General

Chassis	Modular
Rack Units	21 RU
Operating System	Cisco IOS XR
Form Factor	Rack-mountable
Number of Slots	10
Power Supply	AC or DC
Redundancy	Yes
Slots	8 line card slots, 2 route switch processor slots
Memory	16 GB DRAM
Storage	64 GB SSD (Route Processor)
Port Types	Ethernet, OTN
Redundancy Features	Route Processor, Power Supply, Fan Tray
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	5% to 90% non-condensing
Route Processor	Cisco ASR 9000 Series Route Switch Processor