EasyManuals Logo

Cisco ASR 9010 Overview And Reference Guide

Cisco ASR 9010
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #131 background imageLoading...
Page #131 background image
2-77
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Chapter 2 Functional Description
Cooling System Functional Description
Figure 2-70 Cisco ASR 9006 Router Fan Tray
The fan tray contains six axial 92-mm (3.62-in) fans. There is a fan control board at the back end of
each tray with a single power/data connector that connects with the backplane.
The fan tray aligns through two guide pins inside the chassis, and is secured by one captive screw.
The controller board floats within the fan tray to allow for alignment tolerances.
A finger guard is adjacent to the front of most of the fans to keep fingers away from spinning fan
blades during removal of the fan tray.
The maximum weight of the fan tray is 39.7 lb (18.0 kg).
Cisco ASR 9904 Router Fan Tray
The Cisco ASR 9904 Router contains a single fan tray. If a fan tray fails, it is possible to swap a single
fan tray assembly while the system is operational. Replace the missing fan tray within 4 minutes.
243374

Table of Contents

Other manuals for Cisco ASR 9010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 9010 and is the answer not in the manual?

Cisco ASR 9010 Specifications

General IconGeneral
ChassisModular
Rack Units21 RU
Operating SystemCisco IOS XR
Form FactorRack-mountable
Number of Slots10
Power SupplyAC or DC
RedundancyYes
Slots8 line card slots, 2 route switch processor slots
Memory16 GB DRAM
Storage64 GB SSD (Route Processor)
Port TypesEthernet, OTN
Redundancy FeaturesRoute Processor, Power Supply, Fan Tray
Operating Temperature32 to 104°F (0 to 40°C)
Humidity5% to 90% non-condensing
Route ProcessorCisco ASR 9000 Series Route Switch Processor

Related product manuals