Cisco Catalyst 250 Series Configuration Guide

Disabling and Enabling the Ethernet Management Port 50
Additional References 51
Feature Information for Ethernet Management Ports 52
CHAPTER 5 Configuring LLDP, LLDP-MED, and Wired Location Service 53
Finding Feature Information 53
LLDP, LLDP-MED, and Wired Location Service Overview 53
LLDP 53
LLDP Supported TLVs 54
LLDP and Cisco Switch Stacks 54
LLDP and Cisco Medianet 54
LLDP-MED 54
LLDP-MED Supported TLVs 55
Wired Location Service 56
Default LLDP Configuration 57
Configuration Guidelines 57
How to Configure LLDP, LLDP-MED, and Wired Location Service 58
Enabling LLDP 58
Configuring LLDP Characteristics 59
Configuring LLDP-MED TLVs 61
Configuring Network-Policy TLV 63
Configuring Location TLV and Wired Location Service 65
Enabling Wired Location Service on the Switch 68
Configuration Examples for LLDP, LLDP-MED, and Wired Location Service 69
Configuring Network-Policy TLV: Examples 69
Monitoring and Maintaining LLDP, LLDP-MED, and Wired Location Service 70
Additional References for LLDP, LLDP-MED, and Wired Location Service 71
Feature Information for LLDP, LLDP-MED, and Wired Location Service 72
CHAPTER 6 Configuring System MTU 73
Finding Feature Information 73
Information about the MTU 73
System MTU Values 73
System MTU Guidelines 74
How to Configure MTU 74
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
vi OL-29420-01
Contents

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English