Cisco Catalyst 250 Series Configuration Guide

Configuring the System MTU 74
Configuration Examples for System MTU 76
Additional References for System MTU 76
Feature Information for System MTU 77
CHAPTER 7 Configuring Internal Power Supplies 79
Information About Internal Power Supplies 79
How to Configure Internal Power Supplies 79
Configuring an Internal Power Supply 79
Monitoring Internal Power Supplies 80
Configuration Examples for Internal Power Supplies 80
Feature History and Information for Internal Power Supplies 81
CHAPTER 8 Configuring PoE 83
Finding Feature Information 83
Information about PoE 83
Power over Ethernet Ports 83
Supported Protocols and Standards 84
Powered-Device Detection and Initial Power Allocation 84
Power Management Modes 86
Power Monitoring and Power Policing 87
Maximum Power Allocation (Cutoff Power) on a PoE Port 87
Power Consumption Values 88
How to Configure PoE 88
Configuring a Power Management Mode on a PoE Port 88
Budgeting Power for Devices Connected to a PoE Port 90
Budgeting Power to All PoE ports 90
Budgeting Power to a Specific PoE Port 91
Configuring Power Policing 92
Monitoring Power Status 95
Configuration Examples for Configuring PoE 95
Budgeting Power: Example 95
Feature Information for PoE 95
CHAPTER 9 Configuring EEE 97
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29420-01 vii
Contents

Cisco Catalyst 250 Series Specifications

General

Brand	Cisco
Model	Catalyst 250 Series
Category	Switch
Language	English