Cisco Catalyst 2960-L Series User Manual

Link Status 44
10/100/1000 Port Connections 44
10/100/1000 PoE+ Port Connections 44
SFP Module 45
Interface Settings 45
Ping End Device 45
Spanning Tree Loops 45
Switch Performance 46
Speed, Duplex, and Autonegotiation 46
Autonegotiation and Network Interface Cards 46
Cabling Distance 46
Finding the Switch Serial Number 46
Technical Specifications 49
APPENDIX A
Physical Specifications 49
Environmental Specifications 50
Power Requirements 50
PoE Power Consumption 51
Connector and Cable Specifications 53
APPENDIX B
Connector Specifications 53
10/100/1000 Ports (Including PoE) 53
SFP Module Connectors 53
Cables and Adapters 54
SFP Module Cables 54
Cable Pinouts 55
Console Port Adapter Pinouts 56
Configuring the Switch 59
APPENDIX C
Configuring the Switch Using the Configuration Setup Wizard 59
Quick Setup: Accessing the Configuration Setup Wizard 59
Completing the Configuration Setup Wizard 61
Configuring the Switch Using the CLI 61
Accessing the CLI Through the Console Port 61
Cisco Catalyst 2960-L Series 8-Port and 16-Port Switch Hardware Installation Guide
iv
Contents

Cisco Catalyst 2960-L Series Specifications

General

Series	Catalyst 2960-L
Ports	8, 16, 24, or 48 Gigabit Ethernet ports
Layer	Layer 2
Flash Memory	64 MB
MAC Address Table Size	8, 000 entries
Uplink	2 or 4 Gigabit SFP
PoE	Available on selected models
VLAN Support	Up to 255 VLANs
Power Supply	Internal power supply
Operating Temperature	0°C to 40°C (32°F to 104°F)
Dimensions	44.5 x 27.9 x 4.45 cm (17.5 x 11.0 x 1.75 in.)