Cisco Catalyst IW9167I - Page 22

DescriptionCisco PID
DIN Rail Mounting BracketAIR-ACCDMK3700=
Pole Mounting Bracket (for 2”–3.2” diameter pole)AIR-ACCPMK3700=
Pole Mounting Bracket (for 2”–16” diameter pole)AIR-ACCPMK3700-2=
Horizontal Pole Mounting BracketIW-ACC-9167I-BRK=
• Accessory kits
DescriptionCisco PID
Gland kit for SFP port (Qty: 5)AIR-SFP-KIT1=
Adapter, M12 X-code to RJ45 Ethernet connectorIW-ACC-M12ETH=
Adapter, M12 4 Pin A-Code to Micro-fit power connectorIW-ACC-M12PWR=
Spacer for M12 when using on SFP port (Qty: 5)IW-ACC-M12SPCR1=
• M12 Cables
DescriptionCisco PID
M12 DC power cable, 4 pins, A-Code, 10 ftCAB-PWR-M12-10=
M12 to RJ-45 Ethernet cable, 8 pins, X-Code, 10 ftCAB-RJ45-M12-10=
M12 to M12 Ethernet cable, 8 pins, X-Code, 10 ftCAB-ETHM12-M12-10=
• Power adapter and power injectors when PoE is not available
DescriptionPower Supply
Power Adapter, AC-DC, Micro-Fit 4-Pin connectorIW-PWRADPT-MFIT4P=
Power Injector, 60W, outdoor 5GEIW-PWRINJ-60RGDMG=
60W outdoor rated power injector, with North America AC
power plug. For more information, see the power injector data
sheet.
AIR-PWRINJ-60RGD1=
60W outdoor rated power injector, International version with
blunt-end cable. For more information, see the power injector
data sheet.
AIR-PWRINJ-60RGD2=
Cisco Catalyst IW9167I Heavy Duty Access Point Hardware Installation Guide
14
Unpacking Your Access Point
Cisco Orderable Accessories