The hex string is assembled by concatenating the TLV values shown below:
Type + Length + Value
For example, suppose that there are two controllers with management interface IP addresses, 10.126.126.2 and 10.127.127.2.
The type is f1(hex). The length is 2 * 4 = 8 = 08 (hex). The IP addresses translate to 0a7e7e02 and 0a7f7f02. Assembling
the string then yields f1080a7e7e020a7f7f02. The resulting Cisco IOS command added to the DHCP scope is option 43
hex f1080a7e7e020a7f7f02.
Cisco Catalyst IW9167I Heavy Duty Access Point Hardware Installation Guide
54
Troubleshooting
Configuring DHCP Option 43