Preparing for Installation 2-5
Installation Checklist
Installation Checklist
The Installation Checklist (see Figure 2-1) lists all the procedures for initial hardware installation of
new systems. Make a copy of this checklist and mark your entries. Include a copy of the checklist
for each system in your Site Log. (See the “Site Log” section later in this section.)
Figure 2-1 Installation Checklist
Installation Checklist
for Site
__________________________________________________________
Router name________________________________
Router serial number__________________________
Notes:
Task Verified by Date
Installation Checklist copied for each system
Background information placed in Site Log
Environmental specifications verified
Site power voltages verified
Installation site prepower check completed
Required tools available
Additional equipment available
Router received
Printed documentation or UniverCD received (if ordered)
Product registration (in warranty package) completed and mailed
Chassis components verified
Software version verified
Initial electrical connections established
ASCII terminal attached to console port
Signal distance limits verified
Startup sequence steps completed
Initial system operation verified
To Next Page
Loading...
Need help?
General
