Cisco IE 4000 Hardware Installation Guide

11
Product Overview
Management Options
Figure 5 Cisco IE 4000 Switch Rear Panel
Management Options
The switch supports these management options:
 Cisco Network Assistant
Cisco Network Assistant is a PC-based network management GUI application optimized for LANs of small- and
medium-sized businesses. Using the GUI, you can configure and manage switch clusters or standalone switches.
Cisco Network Assistant is available at no cost and can be downloaded from this URL:
http://www.cisco.com/en/US/products/ps5931/tsd_products_support_series_home.html
For information on starting the Cisco Network Assistant application, see the Getting Started with Cisco Network
Assistant guide on Cisco.com.
 Device Manager
You can use Device Manager, which is in the switch memory, to manage individual and standalone switches. This
web interface offers quick configuration and monitoring. You can access Device Manager from anywhere in your
network through a web browser. For more information, see the Device Manager online help.
 Cisco IOS CLI

Cisco IE 4000 Specifications

General

Product Type	Switch
Form Factor	DIN Rail Mountable
MAC Address Table Size	8000
Jumbo Frame Support	9216 bytes
Operating Temperature	-40°C to 70°C
Mean Time Between Failures (MTBF)	Over 500, 000 hours
Memory	256 MB DRAM
Mounting	DIN Rail, Wall
Certifications	EN 50121-4
Ports	8 x 10/100Base-TX Ethernet Ports