• show interface status
• show system redundancy status
Sample output for the show version command on the Supervisor-4 Module
In the following procedure, all show outputs, system messages, and image file names are displayed
for the Cisco MDS 9710 Multilayer Director Switch. The show outputs, system messages, and image
file names will vary based on the Cisco MDS 9700 Series Multilayer Director Switch selected.
switch# show version
Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie
s_home.html
Copyright (c) 2002-2019, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php
Software
BIOS: version 2.6.0
kickstart: version 8.4(1)
system: version 8.4(1)
BIOS compile time: 05/17/2019
kickstart image file is: bootflash:///m9700-sf4ek9-kickstart-mz.8.4.1.bin
kickstart compile time: 6/30/2019 23:00:00 [06/15/2019 14:49:08]
system image file is: bootflash:///m9700-sf4ek9-mz.8.4.1.bin
system compile time: 6/30/2019 23:00:00 [06/15/2019 16:15:18]
Hardware
cisco MDS 9710 (10 Slot) Chassis ("Supervisor Module-4")
Intel(R) Xeon(R) CPU D-1548 with 14270332 kB of memory.
Processor Board ID JAE22440CB1
Device name: switch
bootflash: 3932160 kB
slot0: 0 kB (expansion flash)
Kernel uptime is 0 day(s), 0 hour(s), 36 minute(s), 9 second(s)
Last reset
Reason: Unknown
System version: 8.4(1)
Service:
plugin
Core Plugin, Ethernet Plugin
Active Package(s)
Cisco MDS 9700 Series Switches Hardware Installation Guide
139
Installing, Removing, and Verifying Field Replaceable Units
Verification