Cisco MDS 9700 Series

CHAPTER 10
Accessory Kit Contents
• Accessory Kit Contents, on page 207
Accessory Kit Contents
This appendix lists and illustrates the Cisco MDS 9700 Series accessory kit contents (part number 53-4093-XX).
Table 52: Cisco MDS 9700 Switch Accessory Kit Contents
QuantityDescriptionIllustrationPart Number
1 kitSupport rack-mount bracket kit (includes
the following parts)
69-2503-XX
20 per kit12-24 x 3/4-in. Phillips screws
20 per kitM6 x19-mm Phillips screws
20 per kit10-32 x 3/4-inch screws
2 per kitSupport rack-mount bracket
2 kitsConsole cable connector kit (includes the
following parts)
800-05097-XX
1 per kitRJ-45 rollover cable
1 per kitDB-9F/RJ-45F PC terminal
1 per kitRJ-45/DSUB F/F adapter
1 per kitR-J45/DSUB R/P adapter
1 per kitDSUB screw lock kit
Cisco MDS 9700 Series Switches Hardware Installation Guide
207