Where DocumentedChanged in
Release
DescriptionFeature
Product Overview, on
page 5
8.4(1)Support for Cisco MDS 9700 Crossbar
Fabric-3 Switching Module
(DS-X9710-FAB3) was added for Cisco
MDS 9710 Director.
Support for Cisco MDS 9700 Crossbar
Fabric-3 Switching Module
(DS-X9706-FAB3) was added for Cisco
MDS 9706 Director.
Support for Cisco MDS
9700 Crossbar Fabric-3
Switching Module
Product Overview, on
page 5
8.4(1)Support for Cisco MDS 9700
Supervisor-4 Module (DS-X97-SF4-K9)
was added for Cisco MDS 9710 and 9706
Directors.
Support for Cisco MDS
9700 Supervisor-4
Module
Nondisruptive Migration
for Supervisor Modules,
on page 117
8.4(1)Support for nondisruptive migration from
a Supervisor-1 Module to Supervisor-4
Module was added for Cisco MDS 9710
and 9706 Directors.
Nondisruptive Migration
from a Supervisor-1
Module to a Supervisor-4
Module
Nondisruptive Migration
from Crossbar Fabric-1
Switching Modules to
Crossbar Fabric-3
Switching Modules, on
page 162
8.4(1)Support for nondisruptive migration from
Crossbar Fabric-1 Switching Modules to
Crossbar Fabric-3 Switching Modules
was added for Cisco MDS 9710 and 9706
Directors.
Nondisruptive Migration
from Crossbar Fabric-1
Switching Modules to
Crossbar Fabric-3
Switching Modules
Product Overview, on
page 5
8.1(1b)Support for Cisco MDS 9700 HVDC PSU
(DS-CHV-3.5KW) was added.
Support for Cisco MDS
9700 HVDC PSU
(DS-CHV-3.5KW)
Cisco MDS 48-Port
32-Gbps Fiber Channel
Switching Module, on
page 43
8.1(1)The Cisco MDS 48-Port 32-Gbps Fibre
Channel Switching Module is supported
on Cisco MDS 9700 Series Multilayer
Directors.
Cisco MDS 48-Port
32-Gbps Fibre Channel
Switching Module
Power Supplies, on page
56
6.2(19)A 3500W High-Voltage DC (HVDC)
Power Supply Unit (DS-CHV-3.5KW) is
supported on Cisco MDS 9706 and Cisco
MDS 9710 Directors.
High-Voltage DC PSU
Cisco MDS 24/10 port
SAN Extension Module,
on page 46
7.3(0)DY(1)The Cisco MDS 24/10 port SAN
Extension Module is supported on Cisco
MDS 9700 Series Multilayer Directors.
With 24 line rate 2, 4, 8, 10, and 16-Gbps
Fibre Channel ports and eight 1 and 10GE
or two 40GE Fibre Channel over IP
(FCIP) ports, this module enables large
and scalable deployment of SAN
extension solutions.
Cisco MDS 24/10 port
SAN Extension Module
Cisco MDS 9700 Series Switches Hardware Installation Guide
2
New and Changed Information
New and Changed Information