Cisco NCS 5500 Series

1.2.3.4:666
1234:666,
1.2.3.4:777,
4567:777
end-set
Inline Set Form for Extcommunity-set RT
(1.2.3.4:666, 1234:666, 1.2.3.4:777, 4567:777)
($ipadrr:666, 1234:$tag, 1.2.3.4:777, $tag2:777)
These options are supported under extended community set RT:
RP/0/RP0/CPU0:router(config)#extcommunity-set rt rt_set
RP/0/RP0/CPU0:router(config-ext)#?
#-remark Remark beginning with '#'
* Wildcard (any community or part thereof)
<1-4294967295> 32-bit decimal number
<1-65535> 16-bit decimal number
A.B.C.D/M:N Extended community - IPv4 prefix format
A.B.C.D:N Extended community - IPv4 format
ASN:N Extended community - ASPLAIN format
X.Y:N Extended community - ASDOT format
abort Discard RPL definition and return to top level config
dfa-regex DFA style regular expression
end-set End of set definition
exit Exit from this submode
ios-regex Traditional IOS style regular expression
show Show partial RPL configuration
DescriptionOption
Remark beginning with '#'#-remark
Wildcard (any community or part thereof)*
32-bit decimal number<1-4294967295>
16-bit decimal number<1-65535>
Extended community - IPv4 prefix formatA.B.C.D/M:N
Extended community - IPv4 formatA.B.C.D:N
Extended community - ASPLAIN formatASN:N
Extended community - ASDOT formatX.Y:N
Discard RPL definition and return to top level configabort
DFA style regular expressiondfa-regex
End of set definitionend-set
Exit from this submodeexit
Traditional IOS style regular expressionios-regex
Show partial RPL configurationshow
Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.3.x
138
Implementing Routing Policy
extcommunity-set