Cisco NCS 5500 Series

PurposeCommand or Action
IPv4 IPv6
BFD BFD
R1-v1S Nii0 *PtoP* Up 83 00:00:33 Yes
None None
Displays the NSR status information.show isis nsr status
Example:
Step 6
RP/0/RP0/CPU0:router
router#show isis nsr status
IS-IS test NSR(v1a) STATUS (HA Ready):
V1 Standby V2 Active
V2 Standby
SYNC STATUS: TRUE FALSE(0)
FALSE(0)
PEER CHG COUNT: 1 0
0
UP TIME: 00:03:12 not up
not up
Shows number of ISIS adjacencies, lsps, routes, tunnels,
Te links on active and standby routers.
show isis nsr statistics
Example:
Step 7
RP/0/RP0/CPU0:router
router#show isis nsr statistics
IS-IS test NSR(v1a) MANDATORY STATS :
V1 Active
V1 Standby V2 Active V2
Standby
L1 ADJ: 0
0 0
0
L2 ADJ: 2
2 0
0
LIVE INTERFACE: 4
4 0
0
PTP INTERFACE: 1
1 0
0
LAN INTERFACE: 2
2 0
0
LOOPBACK INTERFACE: 1
1 0
0
TE Tunnel: 1
1 0
0
TE LINK: 2
2 0
0
NSR OPTIONAL STATS :
L1 LSP: 0
0 0
0
L2 LSP: 4
Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 6.3.x
30
Implementing IS-IS
Configuring ISIS-NSR