Cisco NCS 560-4 User Manual

Power Connection Guidelines 67
Guidelines for DC-Powered Systems 67
Guidelines for AC-Powered Systems 67
Installing the N560-PWR1200-D-E DC Power Supply Module 68
Installing the A900-PWR1200-D DC Power Supply Module 70
Activating the DC Power Supply 72
Removing and Replacing the DC Power Supply 72
Installing the AC Power Supply Module for A900-PWR1200-A (1200 W) 74
Recommended Power Cables 75
Activating the AC Power Supply 75
Removing and Replacing the AC Power Supply 76
Installing the Fan Trays 77
Removing and Replacing the Dust Filter 79
Dust Filter Maintenance 80
Removing and Replacing the Fan Trays 80
RSP Installation 82
Installing an RSP Module 82
Removing an RSP Module 84
Removing the IM Center Brackets 85
Interface Module Installation 86
Installing an Interface Module 87
Removing an Interface Module 88
Hot-Swapping an RSP or Interface Module 88
Installing Dust Caps 89
Securing the Cables Around the Cable Management Brackets 89
Connecting the Router to the Network 92
Connecting Console Cables 92
Connecting to the Serial Port using Microsoft Windows 93
Connecting to the Console Port using Mac OS X 94
Connecting to the Console Port using Linux 95
Installing the Cisco Microsoft Windows USB Device Driver 95
Installing the Cisco Microsoft Windows XP USB Driver 96
Installing the Cisco Microsoft Windows 2000 USB Driver 96
Installing the Cisco Microsoft Windows XP USB Driver 96
Cisco NCS 560-4 Router Hardware Installation Guide
v
Contents

Cisco NCS 560-4 Specifications

General

Brand	Cisco
Model	NCS 560-4
Category	Network Router
Language	English