Cisco ONS 15454 M6 - Page 18

Step 6 Install the vertical air plenum to the right of the horizontal air plenum. Follow step 4.
Step 7 Install the horizontal air plenum above the vertical air plenums. Follow step 4.
Figure 18: Pre-assembling the air plenums
Step 8 Install the ANSI 23-inch adapter plates on the horizontal air plenums.
Step 9 Install the wing head screws provided with the kit, and tighten to a torque value of 11.5 in-lb (1.3 N-m).
Installing the ONS 15454 M6 Shelf
18
Installing the ONS 15454 M6 Shelf
DLP-G768 Install Pre-assembled Air Plenums in ANSI 23-inch Configuration