Figure 32: Mounting the Brackets with Air Deflectors (Front-to-Back) on the ONS 15454 M6 Shelf for ANSI Rack Configuration
Step 13 Return to your originating procedure (NTP).
DLP-G562 Mounting the Brackets on the ONS 15454 M6 Shelf for ETSI Rack
Configuration
This task installs the mounting brackets on the ONS 15454 M6 shelf for ETSI
rack configuration.
In an ETSI rack, the mounting brackets are installed only in the front
position.
Note
Purpose
• #2 Phillips Dynamometric screwdriver
• Medium slot-head screwdriver
• Small slot-head screwdriver
Tools/Equipment
NTP-G305 Unpack and Inspect the ONS 15454, ONS 15454 M2, and ONS 15454
M6 Shelves
Prerequisite Procedures
As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Installing the ONS 15454 M6 Shelf
34
Installing the ONS 15454 M6 Shelf
DLP-G562 Mounting the Brackets on the ONS 15454 M6 Shelf for ETSI Rack Configuration
To Next Page
Loading...