During installation, do not use the door to handle the chassis.
Note
Remove the door from the ONS 15454 M6 shelf and reinstall it after installing all the other modules.
Note
Figure 26: Handling the Chassis During Installation
Procedure
Step 1 Complete the necessary task as applicable:
• DLP-G674 Verify the ONS 15454 M6 Shelf for AC Power Module Installation, on page 27
• DLP-G675 Verify the ONS 15454 M6 Shelf for DC Power Module Installation, on page 28
Step 2 Complete the necessary task as applicable:
• DLP-G560 Mounting the Reversible Brackets on the ONS 15454 M6 Shelf for ANSI Rack Configuration,
on page 29
Installing the ONS 15454 M6 Shelf
26
Installing the ONS 15454 M6 Shelf
NTP-G252 Install the ONS 15454 M6 Shelf
To Next Page
Loading...