c) Route the other end of the ground strap cable outside the shelf at an angle of 180 degrees towards the left.
Figure 56: Insert the lug
Step 2 Loosen the deep-front panel screws and slide them outwards using the plastic tabs.
Step 3 Place the deep-front panel close to the shelf so that the shelf notches, and the deep-front panel retention features
are in line, as shown in the following figure.
Installing the ONS 15454 M6 Shelf
64
Installing the ONS 15454 M6 Shelf
NTP-G327 Install the Deep-Front Panel of the ONS 15454 M6 Shelf
To Next Page
Loading...