EasyManuals Logo

Cisco RV130W Administration Guide

Cisco RV130W
141 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
Configuring Networking
Configuring IPv6
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 46
3
Configuring PPPoE IPv6 Settings
You can run IPv4 PPPoE, IPv6 PPPoE, or both. If you run both, your IPv6 WAN
PPPoE settings must match your IPv4 WAN PPPoE settings. If they do not match, a
message is displayed asking if you want to set the IPv6 protocol to match the IPv4
protocol. See Configuring PPPoE.
To configure the PPPoE IPv6 settings:
STEP 1 Choose Networking > IPv6 > IPv6 WAN Configuration.
STEP 2 In the WAN Connection Type field, choose PPPoE IPv6.
STEP 3 Enter the following information (it might be necessary to contact your ISP to obtain
your PPPoE login information):
Username Username assigned to you by the ISP.
Password Password assigned to you by the ISP.
Connect on Demand If your ISP charges based on the amount of time
that you are connected, select the radio button.
When selected, the Internet connection is active
only when traffic is present. If the connection is
idle—that is, no traffic is flowing—the connection is
closed. In the Max Idle Time field, enter the number
of minutes that must elapse with no traffic detected
on the link before the link is shut down.
Keep Alive Keeps the WAN link up by sending a keep-alive
message through the port. In the redial period field,
enter the number of seconds after which the
device attempts to reconnect if it is disconnected.

Table of Contents

Other manuals for Cisco RV130W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco RV130W and is the answer not in the manual?

Cisco RV130W Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
SIM card slotNo
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standardsWi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1000 Mbit/s
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.1D, IEEE 802.1p, IEEE 802.1w, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
USB 2.0 ports quantity1
Supported network protocolsDHCP, PPPoE, PPTP, L2TP, DNS, IGMP, RSTP
Antennas quantity2
Security algorithmsWEP, WPA, WPA2-PSK
Product typeTabletop router
Product colorBlack
LED indicatorsLAN, Power, USB, WAN, WLAN
Output voltage12 V
Power source typeDC
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 85 %

Related product manuals