Cisco SFE2000P

Contents
vi
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-06
Dual Link: Single SCE 2000 Topologies 6-3
Dual Link: Two SCE 2000s Topology 6-5
How to Configure the GBE Interface Parameters 6-7
How to Cable the GBE Line Interface Ports 6-7
Fiber Specifications 6-8
Testing Connectivity: Examining Link LEDs and Counters to Verify that the Network Traffic is Reaching
the Device
6-9
Examining the LEDs 6-9
How to View the Gigabit Ethernet Port Status 6-9
How to View the Gigabit Ethernet Counters 6-10
What to Do Next 6-10
Information About Cascaded Systems 6-11
How to Install a Cascaded System 6-11
CLI Commands for Cascaded Systems 6-12
Topology-Related Parameters for Redundant Topologies 6-12
How to Configure the Connection Mode 6-13
How to Set the Link Mode 6-13
Monitoring the System 6-14
How to Load and Activate a Service Control Application 6-15
CHAPTER 7 Basic SCE 2000 Platform Operations 7-1
Starting the SCE 2000 Platform 7-1
Checking Conditions Prior to System Startup 7-1
Performing Complex Configurations 7-2
Starting the System and Observing Initial Conditions 7-2
Final Tests 7-3
How to Verify Operational Status 7-3
How to View the User Log Counters 7-4
Managing SCE 2000 Configurations 7-4
Viewing Configuration 7-4
How to Save or Change the Configuration Settings 7-5
Example for Saving or Changing the Configuration Settings 7-6
How to Recover a Previous Configuration 7-7
Example for Recovering a Previous Configuration 7-7
How to Display the SCE Platform Version Information 7-8
Example for Displaying the SCE Platform Version Information 7-8
How to Display the SCE Platform Inventory 7-9
Example for Displaying the SCE Platform Inventory 7-9
How to Display the System Uptime 7-9