Smart Network Application (SNA)
Right-Hand Information Panel
Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 665
29
Tags
Tags are used to identify elements in the topology by attributes (see Tags). The Tag block of
the right-hand information displays all the tags assigned to the element, either automatically or
by the user. You can also manage the tags of the selected elements from this part of the panel.
See Tags for additional information.
Statistics
When viewing an SNA-capable device, or the interfaces on an SNA-capable device, you can
select to view historical statistics information on that interface or device.
The Statistics view is accessed from the right-hand information panel.
To view historical statistics on an interface or device, select a specific parameter to view from
a list of available parameters, according to the parameters supported by the embedded counters
history feature. You can then view the status of this parameter on the selected interface for the
previous year.
The following graphs can be viewed:
• Port Utilization Graph
• PoE Consumption Graph (Port)
• PoE Consumption Graph (Device)
• Traffic Graph (Bytes)
• Traffic Graph (Packets)
Port Utilization Graph
This graph is a port-level graph that shows the port utilization percentage of the port over time.
It is available for all ports of devices with full SNA support.
You can select a number of ports to run a side-by-side comparison.
The data is shown as a percentage (0-100) with number and frequency of samples depending
on the displayed time scale:
• Last five minutes—20 samples (one every 15 seconds).
• Last hour—60 samples (one every minute)
• Last day—24 samples (one every hour)
• Last week—7 samples (one every day)
To Next Page
Loading...
Need help?
General
