Name: Cisco SG350X-24
Brand: Cisco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Smart Network Application (SNA)

Services

Cisco Sx350, SG350X, SG350XG, Sx550X & SG550XG Series Managed Switches, Firmware Release 2.2.5.x 695

Current Configuration

For every selected device, the current configuration displays the current DNS server using

preference 1 on the right side. If more than one DNS server exists, the statically-defined server

is displayed.

If the displayed server is a dynamic entry, you are informed of this and prevented from

deleting the server.

The entry created by the service will have preference 1. If a static entry of preference 1 already

exists and was displayed, the static server is replaced by the new entry.

Displayed/Editable Parameters:

To define a new DNS server, enter its IPv4 or IPv6 address.

SYSLOG Server Configuration

This service enables defining the SYSLOG server used by the selected devices.

Current Configuration

For every selected device the SYSLOG server with the lowest index in the SYSLOG table is

displayed.

If a static entry existed and was displayed, the new entry created by the service replaces the

pre-existing entry.

Displayed/Editable Parameters

To define a new SYSLOG server, enter the server’s IPv4 or IPv6 address.

Questions and Answers:

Need help?

Do you have a question about the Cisco SG350X-24 and is the answer not in the manual?

Cisco SG350X-24 Specifications

General