Setting up the Interfaces of the Gateway
Setting up the Wireless LAN
SRP 521 VoIP Gateway Administration Guide 33
3
REVIEW DRAFT — CISCO CONFIDENTIAL
STEP 3 After the client device has been configured, click OK. Then refer back to your
client device or its documentation for further instructions.
WPS Method 3
Use this method if your client device asks for the PIN number of the gateway.
STEP 1 Enter the PIN number listed on this page. (It is also listed on the label on the bottom
of the gateway.)
STEP 2 After the client device has been configured, click OK. Then refer to your client
device or its documentation for further instructions.
The Wi-Fi Protected Setup Status, Network Name (SSID), Security, Encryption, and
Passphrase are displayed at the bottom of the page.
To Next Page
Loading...
