Setting up the Interfaces of the Gateway
Setting up the Wireless LAN
44 SRP 521 VoIP Gateway Administration Guide
3
WMM Setting
The gateway features WMM Support. The No Acknowledgement feature is
available only when the WMM Support feature is enabled.
STEP 1 Click Interface Setup on the tab and then click WiFi Setting in the navigation pane.
Click WMM Setting. The WMM Setting page appears.
STEP 2 If you have other devices on your network that support WMM Support, you can
select Enabled for the WMM Support option.
STEP 3 In the No Ackowledgement option, select Enabled to disable the
acknowledgement feature, so the gateway will not resend data if an error occurs.
STEP 4 Click Submit to save your settings.
Power Control The WiFi output power from the gateway. From this
drop-down menu, choose High, Middle, or Low value to
cover a range of the wireless network. The default is
High.
Field Description
To Next Page
Loading...
