Administration Settings
Remote Management
92 SRP 521 VoIP Gateway Administration Guide
7
Local TFTP
STEP 1 Click Administration on the tab and then click Remote Management in the
navigation pane. Click Local TFTP. The Local TFTP Control page appears.
STEP 2 Click Enabled to enable TFTP.
STEP 3 Click Submit to save your settings.
Field Description
Enable/Disable To enable SNMP identification, click Enabled. To disable
SNMP, click Disabled.
Trusted IP Only trusted IP or IP range can access this gateway via
SNMP.
Get Community Enter the password that allows read-only access to the
SNMP information of the gateway.
Set Community Enter the password that allows read/write access to the
SNMP information of the gateway.