Setting up the Interfaces of the Gateway
Setting up the LAN Interface
26 SRP 521 VoIP Gateway Administration Guide
3
Bridge/VLAN Setting
Bridge / VLAN settings are configured on this page. After clicking Add Rule, you
can create another VLAN.
STEP 1 Click Interface Setup on the tab and then click LAN in the navigation pane. Click
Bridge / VLAN Setting. The Bridge / VLAN Setting page appears.
STEP 2 You can edit or delete a VLAN entry by clicking the edit or delete icon.
STEP 3 Click Add Rule to open the VLAN Add page. From this page you can add a VLAN
entry.
STEP 4 Click Submit to save your settings.
To Next Page
Loading...
