Cisco Small Business Pro series - Page 72

Configuring the Network
CDP Setting
72 SRP 521 VoIP Gateway Administration Guide
4
STEP 1 Click Network Setup on the tab and then click CDP Setting in the navigation pane.
The CDP Setting page appears.
STEP 2 Select CDP options.
STEP 3 Select CDP Setting per Ethernet port.
STEP 4 Click Submit to save your settings.
Field Description
CDP CDP options. Enable All, Disabled All and Per Port. The
default is Per Port
CDP Timer The CDP timer. The CDP timer range is 5-900.
CDP Hold Timer The CDP Hold timer. The CDP timer range is 10-255.