Contents
iv
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Status LEDs and Buttons 3-2
Front Panel LEDs 3-2
Operations Panel LEDs and Buttons 3-4
Rear Panel LEDs and Buttons 3-5
Preparing for Server Component Installation 3-6
Required Equipment 3-6
Shutting Down and Powering Off the Server 3-6
Removing and Replacing the Server Top Cover 3-7
Replaceable Component Locations 3-8
Installing or Replacing Server Components 3-9
Replacing Power Supplies 3-10
Replacement Procedure 3-10
Power Supply Cold Redundancy 3-11
Replacing the I/O Riser 3-12
Replacing an Internal Flash eUSB Drive 3-13
Replacement Procedure 3-13
Enabling or Disabling the Internal USB Port 3-15
Replacing a SAS Riser (RAID Controller) 3-16
Replacing the SAS Riser Battery Backup Unit 3-18
Replacing the Motherboard CMOS Battery 3-20
Replacing CPUs and Heatsinks 3-22
Additional CPU-Related Parts To Order With RMA Replacement Motherboards 3-22
CPU Replacement Procedure 3-22
Replacing Memory Risers 3-26
Replacing DIMMs 3-28
Memory Performance Guidelines and Population Rules 3-28
DIMM Installation Procedure 3-30
Replacing Fan Modules 3-32
Replacing Hard Drives or Solid State Drives 3-33
Replacing a DVD Drive 3-36
Replacing a PCIe Card 3-38
PCIe Slots 3-38
Replacing a PCIe Card in a Non Hot-Swappable Slot 3-39
Replacing a PCIe Card in a Hot-Swappable Slot 3-40
Special Considerations for Cisco UCS Virtual Interface Cards 3-42
Special Considerations for Cisco UCS Fusion ioDrive2 Storage Accelerator Cards 3-42
Installing Multiple PCIe Cards and Resolving Limited Resources 3-43
Installing an NVIDIA Tesla C2050 GPU Card 3-46
Replacing a Trusted Platform Module (TPM) 3-50
Enabling the Intel Trusted Execution Technology (TXT) Feature For the TPM 3-51
To Next Page
Need help?
General